|
Sorry it's taken so long to update this page.
Here's the idea behind putting accessories up on the roof without drilling holes:
If you look at the rubber gasket around the windshield, you will find rain gutters on either side. You will have to lift up the gasket on the side closest to the paint, not the glass side.
Run 12 gauge wire on either side (one side Positive, one side negative) from the engine compartment up through the rain gutter.
Once up to the top, continue using the rooftop rain gutter to route the line to the Roof Accessory attachment.
Once at the Roof Attachment, you will have to decide whether to drill into the crossbar and route power through the crossbar or use cable ties. I suggest drilling because that is something that can be replaced cheap if needed and you have to drill anyway to attach lights or whatever you are putting up there.
If you have any questions or comments, just e-mail me! Montero-Sport@prodigy.net
|
|
